Saturday, December 12, 2009

The week of the 7th

What science ideas did you learn?
We learned about force diagrams and how they relate to motion diagrams and how deltaV is like force. We also learned that the unbalanced force goes in the same direction as deltaV.

How do you know?
We learned from debates, trial ans error, and because Mr Sagan told us so.

Why is this important?
It is important to know how force interacts with our lives.

Saturday, November 21, 2009

The week of the 15th

What science ideas did you learn?
We learned about motion diagrams and how to make them in certain situations. We also found change in velocity using them.

How do you know?
Because Mr. Sagan told us.

Why is this important?
It is important to know how to graph things

Wednesday, November 4, 2009

The week of the 2nd

What science ideas did you learn?
We learned about how slopes are position over time (p/t), speed is position divided by time (x(p/t)), and the function of a graph table (x(t)=(p/t)*(t).

How do you know?
We tested the formulas by filling in the numbers with the info on the graph and the formulas were right. For example p/t on a graph it could be 10/5 or 14/2 and if you divide them you get 2 for both.

Why is this important?
This is important because when were older we will have to graph info and find out more info from that info, and these formulas would help us with them.

Saturday, October 31, 2009

The week of the 26th

What science ideas did you learn?
We worked on making line graphs from information from tables. We learned how the line curves horizontal when its going slower and vertical when it speeds up.

How do you know?
We knew witch way the lines curve because we had cars slowdown and speedup. Then we made a table and graphed the info and we were right.

Why is this important?
This is important because we are going to have to graph things when were older.

Sunday, October 11, 2009

The week of the 5th

What science ideas did you learn?
I learned how light distorts what you see from different angles. We also learned about newton and Huygens had different ideas. Newton thought that light traveled in particles, small balls that travel the speed of light, and Huygens thought that light traveled in waves. we really didn't prove witch one was right. Lastly we learned how particles, when they hit water, will bend upward. We focused more about when light waves hit water. The waves get slower, and bends downward. When it leaves the water the light bends upward.

How do you know?
We looked at a ruler from different angles and from some angles the light was bent. When we learned about how particles change in water is that we used ideas we already know to make predictions. We did the same thing with waves.

Why is this important?
This is important because we are learning about light and we should know what it's made of. We see light being distorted in water all the time and it helps to know how it is distorted

Sunday, October 4, 2009

The week of the 28th

What science ideas did you learn?
Monday was Yom Kippur so we learned nothing. Tuesday we took a test. We also learned about how light bounces off of different objects. Objects like metal and whiteboard light bounced off, Objdects like wood and the all light didnt bounce off in direct beam. We also started our lab report experiment. The next day we finished up the experiment for the project. We learned how light does bounce off in a congruent angle. On friday we related a ballbouncing off the wall to light bouncig off a mirrior. Then we talked about how particles of light (or photon particles) make up light.

How do you know?
I know that light bounces off different objects differently is because we shined light on different materials and recorded what we got. I also know that light bounces off in a congruent angle because we did another experement where we measured the angle off the light. Mr. Finnley told us about the particles so thets how I know about that.

Why is it important to learn these ideas?
Light is important because we use it everyday. That is also why we sould know how it works.

Sunday, September 27, 2009

The week of the 21st

What science ideas did you learn?
We started the week with fire. We learned how when you put a triangle cut out of cardboard and put it in front of the flame on the wall there is a shape of an upside down flame. This happens because the rays from the top of the flame can only go through the whole crossing the rays of the bottom of the flame. Then we learned how cameras take pictures by shinning light on the objects witch bounces in to the lens. The picture comes out upside down because there is a whole in the inside of the camera and the same thing that happens with the flame happens here to. Next we worked with mirrors an how they worked. We came to two conclusions. Either a beam of light hits the mirror and then some light bounces of in one direction and some bounces in every direction and how different materials have different levels of reflectiveness and the other is that a direct beam just bounces of the mirror.

How do you know?
We knew why there was an upside down flame because we used a clear light bulb and we can see the coil in the light upside down witch proves that it had to do with the light not the flame.
we never really didn't do an experiment, we used the little white boards to show or ideas and we kind of all agreed. We are testing the mirror ideas right now.

Why is it important to learn these ideas?
As I said last week we should know how light works because it is important in our lives and it will lead to knew inventions.

Monday, September 21, 2009

The week of the 14th

What science Ideas did you learn?

I learned different Ideas of how light works. We started out with the question "Can you see with in a pitch black room with no light", the answer that my group and every group got is no, you can't see with no light. The next day we worked with a laser. We learned that the beam is straight because we can see it through the flour, and we can the red dot an the wall because the light bounces of the wall in every direction. Next we worked with light bulbs. We figured out that the light beams go in every direction and bounce of objects in every direction.

How did you learn these ideas?

When we did the experiment if you can see with no light, we went into a dark room and tried to read something. When we used the laser we smacked erasers with flour together and we can see the beam. To test if the rays went everywhere we punch a whole in cardboard, put the light next to the whole, and put an object really close to the whole you can see a dot, when you put the object far away from the whole you can't see the dot. It worked the same with a triangle whole.

Why is it important to learn these ideas?

It is important to learn about light because we use light a lot. We should Know about this thing that is so important in our life. Also it can lead to other discoveries.